| Section 2.5 | Performance improvements in Abaqus/CAE |
| Section 2.6 | Usability enhancements in Abaqus/CAE |
| Section 2.7 | Using wildcard characters for file selection |
| Section 2.8 | Enhancements to overlay plots |
| Section 2.9 | Linking field output across viewports |
| Section 2.10 | Accessing plot display customization options from the Visualization module toolbox |
| Section 3.4 | Double precision constraint solving within a single precision Abaqus/Explicit execution |
| Section 3.6 | Dynamic load balancing for domain-level parallel execution |
| Section 4.1 | Model types in Abaqus/CAE |
| Section 4.2 | Midsurface modeling |
| Section 4.3 | View cuts in Abaqus/CAE |
| Section 4.4 | Modeling enhancements for Abaqus/CFD |
| Section 4.5 | Topology tracking in the Sketcher |
| Section 4.6 | Three-dimensional sweep paths for swept features |
| Section 4.7 | Selection of individual faces for repair of face normals |
| Section 4.8 | Geometry repair for shells and solid parts that contain multiple cells |
| Section 4.9 | New tools for editing or repairing faces |
| Section 4.10 | Improvements to repair of small edges and small faces |
| Section 4.11 | Automatic validity check after geometry edits |
| Section 4.12 | Stitching gaps in non-manifold parts |
| Section 4.13 | Enhanced support in Abaqus/CAE for modeling fracture mechanics using XFEM |
| Section 4.14 | Ability to select attachment points for additional modeling tasks |
| Section 4.15 | Enhancements to distributions of orientations |
| Section 4.17 | Control over individual vector display in continuum shell composite layups |
| Section 4.18 | Enhancements to orientations for material orientations and composite layups |
| Section 4.19 | Querying mass properties for beams and trusses |
| Section 4.20 | Querying for disjoint ply regions |
| Section 4.21 | Querying for regions missing section assignments |
| Section 4.22 | Enhancements to the Datum toolset |
| Section 4.23 | Rendering of shell thickness |
| Section 4.24 | Hiding annotations |
| Section 4.25 | Quick display buttons for all datum geometry, viewport annotations, free body cuts, and attributes |
| Section 4.26 | Specifying the universal gas constant |
| Section 5.1 | Streamlined part and assembly import from Elysium Neutral files |
| Section 5.2 | Model import from ANSYS input files |
| Section 5.3 | Running CAD software in the background after changes to CAD parameters |
| Section 5.4 | Automatic geometry repair during part import |
| Section 5.5 | Import and export of model data from stereolithography files |
| Section 5.6 | NX associative import |
| Section 6.1 | Abaqus/CFD analysis |
| Section 6.2 | Incompressible fluid dynamics |
| Section 6.3 | Abaqus/CFD to Abaqus/Standard or to Abaqus/Explicit co-simulation |
| Section 6.4 | Iterative equation solver |
| Section 6.5 | Dynamics enhancements |
| Section 6.6 | Contour integral evaluation improvements |
| Section 6.7 | Continued development of the XFEM-based crack propagation capability |
| Section 6.8 | Enhancements in Abaqus/Standard to Abaqus/Explicit co-simulation |
| Section 6.15 | Direct cyclic analysis in Abaqus/CAE |
| Section 6.19 | Enhancements to the geostatic procedure |
| Section 7.1 | Mohr-Coulomb plasticity in Abaqus/Explicit |
| Section 7.2 | Critical state (clay) plasticity model in Abaqus/Explicit |
| Section 7.3 | Cast iron plasticity in Abaqus/Explicit |
| Section 7.4 | Viscoelasticity with anisotropic elasticity in Abaqus/Explicit |
| Section 7.10 | Low-density foam materials in Abaqus/CAE |
| Section 7.11 | Combining equations of state with pressure-dependent shear plasticity in Abaqus/Explicit |
| Section 7.12 | Johnson-Cook plasticity in Abaqus/Standard |
| Section 7.13 | Enhancements to Johnson-Cook strain rate dependence |
| Section 7.14 | Tension cutoff |
| Section 7.15 | Ignition and growth equation of state |
| Section 7.16 | Specifying a constant pressure specific heat in Abaqus/CFD |
| Section 8.1 | Support for cylindrical elements in Abaqus/CAE |
| Section 8.4 | Fluid elements in Abaqus/CFD |
| Section 9.1 | Eulerian mesh motion in Abaqus/Explicit |
| Section 9.2 | Eulerian boundary conditions in Abaqus/CAE |
| Section 9.4 | CONWEP blast loading in Abaqus/Explicit |
| Section 9.6 | Plotting amplitude data |
| Section 10.1 | Creating a planar constraint |
| Section 11.1 | Eulerian surfaces in Abaqus/CAE |
| Section 11.2 | Pressure penetration in Abaqus/CAE |
| Section 11.8 | Support for element and contact pair removal and reactivation in Abaqus/CAE |
| Section 11.15 | Progressive viewfactor calculation |
| Section 11.16 | Display of connector section assignment tags |
| Section 11.17 | Coincident Point Builder |
| Section 11.18 | Support for position tolerance and adjustment of the slave surface initial position for cyclic symmetry interactions in Abaqus/CAE |
| Section 12.1 | Mapped meshing performance |
| Section 12.2 | Mesh verification, queries, and saved sets |
| Section 12.3 | Improvements to adaptive remeshing |
| Section 12.4 | Tetrahedral meshing enhancements |
| Section 12.5 | Mesh seeding enhancements |
| Section 12.6 | Global node and element renumbering of meshed parts or part instances |
| Section 12.7 | Local node and element renumbering of orphan mesh parts |
| Section 12.8 | Numbering merged nodes |
| Section 12.9 | Preserving node and element labels in the input file |
| Section 12.10 | Editing the mesh of a dependent part instance |
| Section 12.11 | Selecting by feature edge |
| Section 12.12 | Mesh retained on native parts upon model database upgrade |
| Section 13.1 | Element nodal forces in beam section orientations |
| Section 13.2 | PSD and RMS Mises stress contour and history plots from random response analysis |
| Section 13.4 | Isosurface contour type for contour plots |
| Section 13.5 | Allowing for multiple view cuts |
| Section 13.6 | Interpolated values on cut surfaces for symbol plots |
| Section 13.7 | Improved control over arrow color and display in symbol plots |
| Section 13.8 | Combining data from multiple output databases |
| Section 13.9 | Finding the nearest node to a point |
| Section 13.10 | Finding the average temperature of a set of elements |
| Section 13.11 | New output variables for connectors |
| Section 13.12 | Field output for connectors |
| Section 13.13 | Improvements to filtered field output |
| Section 13.14 | Enhancements to free body cuts |
| Section 13.15 | Calculation of contour limits based on all frames in an animation |
| Section 13.16 | Total time display for time history animation |
| Section 14.5 | New location option for saving plug-ins created with the Really Simple GUI (RSG) Dialog Builder |
| Section 14.6 | Utility routine to obtain the volume fraction in Eulerian elements |
| Section 15.1 | Python upgrade |
| Section 15.2 | Accessing internal sets |