*Heading
** Job name: TEMP Model name: Model-1
**
** PARTS
**
*Part, name=PART-1
*End Part
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=PART-1-1, part=PART-1
*Node
      1,           0.,           0.
      2,          10.,           0.
      3,          10.,          10.
      4,           0.,          10.
*Element, type=CGAX4T
1, 1, 2, 3, 4
*Elset, elset=AXSOL
 1,
** Region: (Section-1-AXSOL:AXSOL)
*Elset, elset=_I1, internal
 1,
** Section: Section-1-AXSOL
*Solid Section, elset=_I1, material=ELMAT
1.,
*ORIENTATION,NAME=REBAR1,DEFINITION=OFFSET TO NODES
2,4
3
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR1,SINGLE
AXSOL,.4,.25,.25
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR1_2,SINGLE
AXSOL,.4,.50,.25
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR1_3,SINGLE
AXSOL,.4,.75,.25
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR2,SINGLE
AXSOL,.4,.5,.5
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR2_2,SINGLE
AXSOL,.4,.50,.5
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR2_3,SINGLE
AXSOL,.4,.75,.5
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR3,SINGLE
AXSOL,.4,.75,.75
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR3_2,SINGLE
AXSOL,.4,.50,.75
*REBAR,ELEMENT=CONTINUUM,MATERIAL=RBMAT2,NAME=RB2LAYR3_3,SINGLE
AXSOL,.4,.75,.75
*End Instance
*Nset, nset=_M3, internal, instance=PART-1-1, generate
 1,  4,  1
*Nset, nset=_M4, internal, instance=PART-1-1
 2,
*Nset, nset=_M5, internal, instance=PART-1-1
 1,
*Nset, nset=_M6, internal, instance=PART-1-1
 4,
*Nset, nset=_M7, internal, instance=PART-1-1
 2, 3
*End Assembly
** 
** MATERIALS
** 
*Material, name=ELMAT
*Conductivity
1.,
*Elastic
1.,0.
*Material, name=RBMAT2
*Elastic
 3e+07,0.
** 
** BOUNDARY CONDITIONS
** 
** Name: Disp-BC-1 Type: Displacement/Rotation
*Boundary
_M3, 5, 5
** Name: Disp-BC-2 Type: Displacement/Rotation
*Boundary
_M4, 2, 2
** Name: Disp-BC-3 Type: Displacement/Rotation
*Boundary
_M5, 1, 1
_M5, 2, 2
** Name: Disp-BC-4 Type: Displacement/Rotation
*Boundary
_M6, 1, 1
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, nlgeom, inc=200
LARGEDISPLACEMENTANALYSIS
*Coupled Temperature-Displacement, steady state
0.1, 1., 
** 
** BOUNDARY CONDITIONS
** 
** Name: Disp-BC-5 Type: Displacement/Rotation
*Boundary
_M7, 1, 1, 5.
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=1
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field, variable=PRESELECT
** 
** HISTORY OUTPUT: H-Output-1
** 
*Output, history, variable=PRESELECT
*El Print, freq=999999
*Node Print, freq=999999
*EL FILE, F=1
S,
E,
*EL FILE, REBAR, F=1
S,
E,
*NODE FILE, F=1
U,
RF,
*End Step