| Section 2.2 | Queuing sessions running interactively |
| Section 2.3 | Persistence for session objects and options |
| Section 2.4 | Boolean operations on sets and surfaces |
| Section 2.5 | Consistency of objects during instance merging operations |
| Section 2.6 | Controlling part instance display from the Model Tree or from the viewport |
| Section 2.7 | Inverting component display and undoing display group changes from the Display Group toolbar |
| Section 2.8 | Clearer organization for view cut color selection options |
| Section 3.1 | Modeling enhancements for electromagnetic analyses |
| Section 3.2 | SIMULIA Associative Interface for Abaqus/CAE |
| Section 3.3 | New naming convention for imported CAD parts |
| Section 3.4 | Retaining intersecting boundaries during part import from ACIS |
| Section 3.5 | Constraints in the Sketcher |
| Section 3.6 | Projecting mesh edges or nodes onto a sketch |
| Section 3.7 | Viewing model database attributes in the Visualization module |
| Section 3.8 | Creating geometry from orphan elements |
| Section 3.9 | Exporting contour plot data to 3D XML |
| Section 3.10 | Creating sets and surfaces during selection operations |
| Section 3.11 | Enhancements to mapped analytical fields in Abaqus/CAE |
| Section 4.1 | Implicit advection in Abaqus/CFD |
| Section 4.2 | Porous media flows in Abaqus/CFD |
| Section 4.3 | Time-harmonic electromagnetic analysis in Abaqus/CAE |
| Section 4.4 | Coupled thermal-electrical-structural analysis in Abaqus/CAE |
| Section 5.6 | Smoothed particle hydrodynamics improvements |
| Section 6.1 | Material calibration for hyperelasticity with permanent set |
| Section 6.2 | Material models for electromagnetic problems in Abaqus/CAE |
| Section 6.3 | New electrical/magnetic material behavior category in material editor |
| Section 6.5 | Enhancements to Mullins effect in Abaqus/Explicit |
| Section 6.6 | Viscoelasticity for cohesive elements with traction-separation behavior in Abaqus/Explicit |
| Section 6.7 | Rayleigh damping enhancement in Abaqus/Explicit |
| Section 7.1 | Support for electromagnetic elements in Abaqus/CAE |
| Section 7.3 | Thick-walled pipe elements in Abaqus/Standard |
| Section 7.4 | Defining the anisotropic mass tensor |
| Section 8.1 | Prescribing loads and boundary conditions in an electromagnetic analysis in Abaqus/CAE |
| Section 8.2 | New category choices for loads and boundary conditions in Abaqus/CAE |
| Section 8.3 | Changing the coordinate system for fluid velocity boundary conditions in Abaqus/CAE |
| Section 8.4 | Enhancements to distributed body heat flux |
| Section 8.6 | Fluid cavity pressure predefined fields and boundary conditions in Abaqus/CAE |
| Section 8.8 | New porous drag body force load in Abaqus/CFD |
| Section 8.11 | Base motion boundary conditions and PSD amplitudes in Abaqus/CAE |
| Section 8.12 | Total flux distribution option for surface heat flux in Abaqus/CAE |
| Section 8.13 | Defining connector loads and boundary conditions using assembled fasteners and template models |
| Section 10.1 | Surface fluid cavities and fluid exchanges in Abaqus/CAE |
| Section 10.4 | Enhancements to general contact definitions in Abaqus/CAE |
| Section 10.5 | Surface smoothing enhancements |
| Section 10.6 | Eulerian-Lagrangian thermal contact |
| Section 10.7 | Gap electrical conductance in Abaqus/CAE |
| Section 11.1 | Defining a seam in an Abaqus/CFD analysis |
| Section 12.1 | Local controls for tetrahedral meshing |
| Section 12.2 | Combining orphan and native mesh features in a model |
| Section 12.3 | Persistent display of seeds |
| Section 12.4 | Enhanced node editing functionality |
| Section 12.5 | Dragging nodes |
| Section 12.6 | Improved display for selection of mesh parts |
| Section 12.7 | Node and element numbering in flattened input files |
| Section 12.8 | Adding a boundary layer to a tetrahedral mesh |
| Section 12.9 | Mesh retention during feature additions and modifications |
| Section 14.1 | Requesting field output on exterior nodes and elements in Abaqus/CAE |
| Section 14.2 | Displaying multiple slices of view cut data |
| Section 14.3 | Enhancements to free body display |
| Section 14.4 | Editing free body cuts |
| Section 14.5 | Selecting elements by topology in the Visualization module |
| Section 14.6 | Enhancement to material orientation plot display |
| Section 14.7 | Nodal field output for tie constraints |
| Section 14.8 | Maximum damage initiation output for shells |
| Section 14.9 | Air blast pressure load output |
| Section 14.12 | Reading X–Y data from history output based on the step time |
| Section 14.13 | Filtering selections for results output |
| Section 16.1 | Expanded object coverage for definition of custom kernel data |
| Section 16.2 | Descriptive header in the journal file |
| Section 16.3 | Abaqus PDE improvements |
| Section 16.4 | Skipping the last command during session recovery |
| Section 16.5 | Faster tab completion |
| Section 16.6 | Selected errors now classified as an AbaqusExceptionType |
| Section 16.7 | Better control over writing messages to the journal file |
| Section 16.8 | Reformatting commands in Python files with proper indentation |
| Section 16.9 | Improved message handling and reporting of plug-ins |
| Section 16.10 | Stop button for scripts |