Abaqus/CAE can read selected data from any of the models in the current model database. When you select a model in the Visualization module, Abaqus/CAE makes a subset of the loads, predefined fields, and interactions specified in that model available for selection as field output variables. Once selected, you can plot contours or symbols for the selected item in a particular step of your analysis. Abaqus/CAE creates a single dummy frame for each step in the model database; you cannot navigate from frame to frame when you display model data.
Only a subset of the loads, predefined fields, and interactions you can define in a model are available for visualization, and the attributes in this section can be displayed when their propagation status is Created in this step, Propagated from a previous step, or Modified in this step. The following attributes can be displayed in contour plots or symbol plots in the Visualization module:
Supported loads
Unless stated otherwise, the loads below are supported for display for all distributions except user-defined distributions. Abaqus/CAE does not consider any amplitude data associated with the load definition when you display it in the Visualization module. Abaqus/CAE displays (L) before the name of each load that is available for display in the current step.
Concentrated force
Moment
Concentrated charge
Concentrated heat flux
Surface charge
Concentrated concentration flux
Surface heat flux (for all distributions except total flux)
Surface concentration flux
Pressure load (for all distributions except total force)
Surface film coefficient
If you defined a load using a user-specified coordinate system, the modified orientation is reflected in the Visualization module as well. Abaqus/CAE also customizes the display of any load that is defined using an expression field as its custom distribution; display of loads with mapped fields is not supported.
Predefined fields
Abaqus/CAE displays (P) before the name of each predefined field that is available for display in the current step.
Temperature (all distributions except From results or output database file and only the Constant through section variation.)
Velocity (translational velocity components only)
If you defined a predefined field using an expression field or a mapped field, the custom distribution is reflected in the Visualization module as well.
Interactions
Abaqus/CAE displays (I) before the name of each interaction that is available for display in the current step. Surface film condition (film coefficient and sink temperature) is the only supported interaction.
